PRODUCT OVERVIEW OVERVIEW New Sail-Drive Break-In: On the initial engine start-up, allow the engine to idle for approximately 15 minutes while you check for proper Sail- Drive function and Sail-Drive oil leaks. During the break-in period, carefully observe Sail-Drive seal indicators for proper Sail-Drive function. During the break-in period, check the Sail- Drive oil levels frequently. Dealer / Distributor Responsibilities In general, a dealer's responsibilities to the customer include predelivery inspection and preparation such as: Owner / Operator Responsibilities The operator must, and assumes all responsibility to:
Read and understand the operation manual prior to operating the sail-drive; Perform all safety checks as necessary to ensure safe operation; Comply with and follow all lubrication and maintenance instructions and recommendations; and Have an authorized Yanmar dealer / distributor perform periodic checkups. Conducting normal maintenance service and replacing consumable parts as necessary is the responsibility of the owner / operator and necessary to provide the best durability, performance and dependability of the Sail-Drive while keeping your overall operating expenses to a minimum. Individual operating habits and usage may increase the frequency of performing maintenance service condition.
Monitor conditions frequently to determine if the maintenance intervals suggested in the manual are frequent enough for your Sail- Drive. Ensure that the vessel is properly equipped. Prior to delivery, make certain that the Yanmar Sail-Drive and other equipment are in proper operating condition. Make all necessary adjustments for maximum efficiency. Familiarize the customer with the on-board equipment. Explain and demonstrate the operation of the Sail-Drive and vessel. SD Operation Manual 9 © 2009 Yanmar Marine International