Doosan D90S-5 — Doosan D90S-5 User Manual

Maintenance Section Every 10 Service Hours or Daily You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures. Inspection Engine for Fluid Leaks Coolant Level – Check 1. Start the engine and allow it to reach operating temperatures. At operating temperature, the engine coolant is hot and under pressure. 2. Turn the engine off. Steam can cause personal injury. 3. Inspect the entire engine for oil and/or coolant leaks. Check the coolant level only after the engine has been stopped and the filter cap is cool enough to touch with your bare hand. Engine Oil Level - Check 1.

Raise the hood and seat assembly. 4. Repair as necessary before continuing. Remove the filter cap slowly to relieve pressure. Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury. Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. Typical Example Diesel Engine Truck Typical Example 2. Maintain oil level between the MAX. and MIN. marks on the dipstick. Typical Example LP Engine Truck 1. Observe the coolant level with engine cold. Maintain coolant level to the proper line on expansion bottle.

If the expansion bottle has no coolant, it will be necessary to check coolant at the radiator filter neck. 147 WARNING WARNING