Doosan D90S-5 — Doosan D90S-5 User Manual

Maintenance Section 2. Remove the radiator cap. Fill radiator to the top of the filter neck. Inspect radiator cap. Replace if damaged. Install the radiator cap. Air Cleaner Indicator – Check Service Indicator Typical Example Typical Example Diesel Engine Truck 3. Start and run the engine to stabilize the coolant level in the filter neck. If low, add coolant until it reaches the top of the filter neck. Install the radiator cap. Observe coolant level in the expansion bottle. If necessary, add coolant to bring the coolant to the appropriate line on the expansion bottle. 4. Stop the engine. 5. Inspect the cooling system for leaks, hose cracks or loose connections. 1.

Observe the air cleaner service indicator. 2. Service the air cleaner when the RED band in the service indicator, locks in the visible position. See topic, "Air Intake System - Check, Clean" in "Every 250 Service Hours or Monthly". NOTE: Service the element more frequently, as required, in severe dust or lint conditions. Also, service it more frequently where the operator is required to wear a respirator. 3. Close hood and seat assembly. Pressure air can cause personal injury. When using pressure air for cleaning, wear a protective face shield, protective clothing and protective shoes. Maximum air pressure must be less than 205 kPa (30 psi) for cleaning purposes. 6.

Blow any dust and lint from the radiator fins. 148 WARNING