if left engaged for a long period of time. Park the vehicle on a flat surface. If you can’t do so, block the wheels and engage a low gear. Electric starter button Pushing in on this button activates the starter motor. Before starting the engine, make sure the igniti- on switch is in the ON position, the transmission is in neutral, the reverse shift lever is in the forward position and the parking brake is engaged. started also when engaging the brake. Choke The vehicle is equipped with an automatic choke. Light switch The light switch has 2 positions: low beam, high beam. With position „ON“, the side lights are on. With position 2, low beam and high beam are on.
Throttle lever Control engine RPM with the po- sition of the throttle lever. Operate this lever with the thumb. Pushing it forward increases engine RPM. q NOTE This ATV has safety interlock swit- ches which prevent the starter mo- tor from activating when the trans- mission is not in neutral. When the transmission is shifted into neutral or into a gear, the models can be Page 27