Throttle Limiter Screw Throttle lever travel may be limited by adjusting the throttle limiter screw. The throttle limiter should be adjusted according to the operator’s skill and experience. To adjust the throttle limiter, use the following procedure: q NOTE The ATV is equipped with a CDI unit that retards ignition timing when maximum RPM is approached. Hand brake lever (left side) Compressing the brake lever will also apply the brake to the front and rear wheels. Foot brake pedal (right side) Pressing the foot brake pedal downward will apply the brake to the front and rear wheels. 1. Loosen the jam nut 2.
Turn the throttle limiter screw clockwise to decrease engine RPM maximum or counter-clockwise to increase engine RPM maximum. 3. Tighten the jam nut securely. Parking brake lever (right side) Will block the rear wheels. Page 28