Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUSTMENT ADJUSTING OPERATOR'S SEAT WARNING (C) Adjust reclining angle 3 - 114 Park the machine in a safe pla ce and stop the engine when carrying out adjustment of the operator's Adjust the seat position at the beginning of each shift or when operators change. Adjust the seat so that the bra ke pedal can be depressed all the way down w ith the operator's back a gainst the backre Machines equipped with stan dard seat (A) Fore-and-aft adjustment Pull lever (1), set the seat to a position where it is easy to operate, then release the lever. (7.9 in) (10 stages) Fore-aft adjustment:

200 mm (B) Weight and height adjustm ent of seat Turn knob (2) under the sea t so that weight adjustment indicator (3) displays the green ran turning the knob (2) while t ge. The height can be adjusted by he green range is displayed. o raise the seat and turn the knob he seat. less, 75 mm (3 in) to 130 kg (110 to 237 lb) Turn the knob clockwise t counterclockwise to lower t Height adjustment range: step Weight adjustment range: 50 REMARK When the seat is pushed for becomes greater; when the ward, the available reclining angle seat is pushed back, the available reclining angle becomes sm aller. When moving the backrest, return the backrest to its origi nal position before moving the seat.

Pull up lever (4), set the seatb ack to a position where it is easy to operate, then release the leve r. (D) Adjusting direction of seat Pull lever (5) up to FREE posi tion (F) to release the lock. It is then possible to change the directi on of the seat to a position facing 15 ° to the right. After changing the direction of the seat, return the lever securely to LOCK position (L). Change the direction of th operation of the ripper. e seat to the right for the ease of REMARK If the direction of the seat is ch anged, the steering, directional, and gearshift lever is also intercon nected and changes direction.