Komatsu — STARTING ENGINE

. OPERATION OPERATION STARTING ENGINE NORMAL STARTING WARNING (2) and turn the key to the 3 - 124 Sit dow n in the operator's seat befor Do not attempt to start the engine b y short-circuiting the engine starting circuit. Such an act may ca use serious bodily injury or fire. Check t hat there are no persons or obstacles in the surroundin g area , then sound the horn and star Exhaus t gas is toxic. When starting the engine in confined spaces, b e particularly careful to ensure NOTICE Do not If the e crank the starting motor conti ngine does not start, wait for nuously for more than 20 second at least 2 minutes, then repeat th proced Before ure from Step 2.

starting the engine, check th at the fuel control dial is in the lo idling ( On this provide MIN) position. machine, to protect the turbo d. In cold weather, even charger, a turbo protect function if fuel control dial (1) is move immedi ately after starting the engine , the engine speed may not chang for sev eral seconds. uel control dial is at the FU LL position (MAX), the engine w If the f acceler ate suddenly and cause dam age to the engine parts, so set it an inter mediate or low speed positio n (MIN). 1. Set f uel control dial (1) to the lo w idling (MIN) position. If the to the dial is at the high idling (M AX) position, always change low idling (MIN) position. 2.

Inser RT position (C). The engin