Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION STARTING IN COLD WEATHER WARNING 3 - 125 3. When the engine starts , release the key in sta rting switch (2 ey will return auto matically to the ON po sition (B) Start th e engine only after s itting down in the operato r's sea t. Do not attempt to start the e ngine by short-circuiting t he engine startin g circuit. Such an act may caus e a serious bodily injury or fire. hat there are no persons or obstacles in the surrounding area, then sound the horn and start the engine. se starting aid fluids as they may cause explosions. t gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure good ventilation.

Check t hat there are no per sons or obstacles i n the s urroundin g area , then sound the horn and start Never u se starting aid fluids as they may caus e explosions. Exhaus t gas is toxic. When starting the engine in con fined spaces, be particularly careful to ensure NOTICE Do not If the e crank the starting mo ngine does not start, tor continuously f wait for at least 2 or more minute than 2 s, then 0 second repeat th proced Before ure from Step 2. starting the engine, check that the fuel control dial is in the lo idling ( On this provide MIN) position. machine, to protect t d.

In cold weather he turbocharger, a turbo protect function i , even if fuel control dial (1) is move immedi for sev ately after starting th eral seconds. uel control dial is at e engine, the engine speed may not chang the FULL position (MAX), the engine wi If the f acceler ate suddenly and ca use damage to the engine parts, so set it t an inter mediate or low spee d position (MIN). 1. Set fu el control dial (1) to the low idling (MIN) position. If the to the dial is at the high i dling (MAX) position, a lways change low idling (MIN) p osition.