. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING times) until no more Tightening torque: 4.9 to 6.9 Nm (0.5 to 0.7 kgm , 3.6 to 5.1 lbft) 3 - 188 5. Loosen a ir bleed er (5) of the supply pump. Pump priming pu mp (approx . 90 to bubbles c air bleed ome ou er (5). 7. Tighten w ing nut (4) securely to lock lever (3) in Target tightening torque: 11. 8 Nm (1.2 kgm, 8 .7 lbft 8. Turn the key in th e starting s witch to the START start t he engine. When doing this, do not c ran k the st arting motor continuously for more than 20 seconds . If the engi ne does not start, wai t for at least 2 minute s, then again. this a maximum of 4 tim 9.
If t he engine doe s not start, r epeat th e operation from Ste p 1.