. MAINTENANCE OUTLINES OF SERVICE 4 - 6 FUEL To prevent the moisture in the a ir from condensing and forming wat er insi de the fu el tank, always fill the f uel tank after completing the day's work . trument, and if fuel containing water or dirt is used, it cannot work properly. mpurities get in when storing or adding fuel. e temperatures given in the Operation and Maintenance Manual. The fuel pump is a precision ins trument, and if fuel containing wat er or d irt is use d, it cannot wo rk properly.
Be extremely careful not to let i mpurities get in when storing or adding fu Always use fuel that matches th e temperatures given in the Operation a nd Maintenance Manua If the fuel is used in tempera of lower than -15°C), the pro If the fuel is used in temperat this may result in a drop in o If the fuel is used in tempera tures lower than the specified temperatu re for us e (particularly a t temperatures perties of the fuel will make it congeal. If the fuel is used in temperat ures higher than the specified temperatur e for use, the viscosity w ill go down, and utput or other problems.
Before starting the engine, or w hen 10 minutes have passed after a dding fuel, drai n the sediment and water f rom the fuel tank. If the engine runs out of fuel, or if the filters have been replaced, it is necessary to bleed the air from the circuit. NOTICE Always use diesel oil for the fuel. To ensure good fuel consumption cha racteristics and exhaust gas characteristics, th e engine mounted on this machine use s an electronically controlled high-pressure fuel injection device. This device requires hi gh precisi on parts and lub rication, so i f low viscosity fuel with low lubricating abili ty is used, the durability may drop markedly.
COOLANT AND WATER FOR DILUTION unction of preventing corrosion as well as preventing freezing. g is not an issue, the use of antifreeze coolant is essential. d with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has The coolant has the important f unction of preventing corrosion as well a s prevent Even in the areas where freezin g is not an issue, the use of antifreeze c oolant is Komatsu machines are supplie d with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifree ze and cooling propertiesand can be used continuo usly for 2 year s or 400 0 hours.
As a basic rule, we do not re commend the use of any coolant other than Komatsu genuine supercoolant coolant, it may cause serious problems, such as corrosion of the engine and ystem. uted with distilled water, so it is not flammable. other matsu genuin e supercoolant (AF-NAC). If you use another and aluminum parts of the cooling s The Supercoolant is already dil uted with distilled water, so it is not With the Supercoolant (AF-NAC ), the density used for the coolant differs accordin g to the ambie nt temperature. For details of the coolant densit y, see "CLEAN INSIDE OF COOLING S YSTEM ( PAGE 4-20)".
Even in areas where it is not co nsidered necessary to prevent freezing, al ways use Supercoolant (AF-NAC) with a density of over 30% in order t o prevent corrosion of the cooling s ystem Supercoolant (AF-NAC) is dil uted with distilled water that doe substances. Never dilute the S When using antifreeze, always observe the precautions given in th e Operation an d Maintenanc If the engine overheats, wait for the engine to cool before adding c oolan If the coolant level is low, it will c ause overheating, and will also cau se problems wit h corrosion du e to air entering the coolant.