. MAINTENANCE OUTLINES OF SERVICE KOWA ANALYSIS ITEMS Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of iron, copper, and other metal wear particles in the oil. Measurement of particle quantity This uses a PQI (Particle Quantifier Index) measurer to measure the quantity of iron particles of 5 µ m or more, enabling early detection of failures. 4 - 7 GREASE eizure and noises at the joints. t is used under heavy-duty conditions. Always use the recommended grease and Grease is used to prevent s This construction equipmen t is used under heavy-duty condition follow the change intervals a Manual.
nd recommended ambient temperatures given in this Operation and Main tenance The nipples not included in t he MAINTENANCE section are nipple s used when over hauling, so they do not need grease. If any part becomes stiff or g enerates noise after being used for a long time, grease it. grease that is pushed out when greasing. enerates noise after being used for a long time, grease Always wipe off all of the old grease that is pushed out when greasing. Be particularly careful to wip wear of the rotating parts.
e off the old grease in places where sand or dirt stickin g in the grease wou ld cause CARRYING OUT KOWA (K omatsu Oil Wear Analysis) The oil clinic samples the oil pe riodically and analyzes it. This is a pr eventive maintena nce service, which provides early discovery of abnormal par ts and wear of the drive parts of the m achine. This then makes it possible t o ensure prevention of failures and redu ction in downtime. Komatsu's long years of experi ence and rich supply of accumulated data make it poss ible to accurately d etermine the condition of your machine. This enables us to locate the problem s and to recomme nd suitable and tim ely repair methods.
The oil clinic charges the cust omer only the actual costs, and provides an immediate report of the results of the analysis and recommendations for action to take. This low-cost servi ce can save you hi gh costs and incon venience in the future, so we strongly re commend you to avail yourself of this service. Others Measurements are made of items such as the ratio of water or fu el in the oil, and th e dynamic viscosit