Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE Lower ripper (b) on the ground vertically so that the pin is at the lowest position. 2. Turn the cap of oil filler port (F) slowly to release the internal pressure, then remove the cap. 3. Remove plug (1) at the bottom of the hydraulic tank, loosen drain valve (2), and drain the oil. After draining the oil, tighten drainvalve (2) and plug (1). When loosening drain valve (2), be careful not to get oil over yourself. 4 - 79 (Semi U-dozer, U-dozer Lower the blade on the ground so that backside (a) is upright.

Item Dimension Item Dimension Blade (DUAL) Tilt Cylinder length 1,292mm (50.9in) Tilt Cylinde Blade (SINGLE) Brac 1,372mm r length (54.1in) 1,372mm e (54.1in) Ripper (VMR) Lift Cylinder length 1,543mm (60.8in) Lift Cylinde Ripper (VMR) Tilt Cylinde 1,543mm r length (60.8in) Tilt Cylinder length 1,607mm (63.3in) 1,607mm r length (63.3in)