Komatsu — TROUBLESHOOTING

TROUBLESHOOTING E-1 PC130-7 20-405 (1) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 8 Defective alternator (Internal defect) aPrepare with starting switch OFF, then turn starting switch to ON or START position and carry out troubleshooting. E12 (male) Resistance Between (1) and chassis ground Max. 1 V 9 Disconnection in wiring harness (Disconnection in wiring harness or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Wiring harness between FB1-18 outlet and H15 (female) (1) Resistance Max.

1 z Wiring harness between H15 (female) (4) and J01 and R11 (female) (5) Resistance Max. 1 z Wiring harness between R11 (female) (3) and A27 (female) (1) Resistance Max. 1 z Wiring harness between starting safety relay C and starting motor C Resistance Max. 1 z Wiring harness between FB1-3 outlet and S14 (male) (1) Resistance Max. 1 z Wiring harness between S14 (male) (3) and R11 (female) (1) Resistance Max. 1 z Wiring harness between R11 (female) (2) and R13 (female) (6) Resistance Max. 1 z Wiring harness between R13 (female) (3) and J04 and chassis ground (A10) Resistance Max.

1 z 10 Short circuit with chassis ground in wiring harness (Contact with ground circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Between FB1-18 outlet – H15 (female) (1) wir- ing harness and chassis ground Resistance Min. 1 Mz Between H15 (female) (4) – J01 – R11 (female) (5) or P01 (female) (4) or C01 (female) (17) or other related circuit wiring harness and chassis ground Resistance Min. 1 Mz Between R11 (female) (3) – A27 (female) (1) wiring harness and chassis ground Resistance Min. 1 Mz Between starting safety relay C – starting motor C wiring harness and chassis ground Resistance Min.

1 Mz Between FB1-3 outlet – S14 (male) (1) wiring harness and chassis ground Resistance Min. 1 Mz Between S14 (male) (3) – R11 (female) (1) wir- ing harness and chassis ground Resistance Min. 1 Mz Between P02 (female) (14) – J05 – R13 (female) (2) wiring harness and chassis ground Resistance Min. 1 Mz 11 Short circuit with power source in wiring harness (Contact with 24-V circuit) aPrepare with starting switch OFF, then turn starting switch ON and car- ry out troubleshooting. Between A27 (female) (2) – E08 (male) (1) or J02 or D01 (female) (6) or P02 (female) (11) or other related circuit wiring harness and chassis ground Voltage Max. 1 V