TROUBLESHOOTING E-13 E-13 When starting switch is turned ON, basic check items light up or flash Circuit diagram related to engine oil level switch PC130-7 20-423 (1) Trouble (1) Engine oil level monitor flashes. Related information • When the starting switch is turned ON, if the engine oil level monitor detects lowering of the engine oil level, it flashes. • The input state (ON/OFF) from the engine oil level switch can be checked with the monitoring function. (Code:
046, Center of lower line) Possible causes and standard value in normal state Cause Low engine oil level 1 (When system is normal) Defective engine oil level 2 switch (Internal disconnection) Disconnection in wiring harness 3 (Disconnection in wiring harness or defective contact in connector) 4 Defective monitor panel Standard value in normal state/Remarks on troubleshooting ow engine oil level When system is normal) Check the engine oil level. If it is low, add new oil. efective engine oil level witch nternal disconnection) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch.
E03 (male) Engine oil level Resistance Between (1) and chassis ground When normal Max. 1 z When low Min. 1 Mz isconnection in wiring arness Disconnection in wiring arness or defective ontact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Wiring harness between P02 (female) (8) and E03 (female) (1) Resistance Max. 1 z efective monitor panel aPrepare with starting switch OFF, then turn starting switch ON and car- ry out troubleshooting. P02 Engine oil level Voltage Between (8) and chassis ground When normal Max. 1 V When low 20 – 30 V Trouble (2) Engine oil replacement monitor lights up.
Related information • When the starting switch iResistances turned ON near the engine oil replacement period, the engine oil replacement monitor lights. (Set up Machine only) Possible causes and standard value in normal state Cause Engine oil replacement 1 period (When system is normal) 2 Defective monitor panel Standard value in normal state/Remarks on troubleshooting ngine oil replacement eriod When system is normal) It is near the engine oil replacement period. Check the elapsed time and replace the oil.
efective monitor panel If the time before the set engine oil replacement period is longer than 10 hours, the monitor panel is defective (Troubleshooting cannot be carried out since the defect is in the monitor panel).