TROUBLESHOOTING E-15 Circuit diagram related to engine oil pressure switch PC130-7 20-429 (1) Trouble (2) Engine oil pressure monitor flashes. Related information • If the engine oil pressure monitor detects lowering of the engine oil pressure, it flashes. • The input state (ON/OFF) from the engine oil pressure switch can be checked with the monitoring func- tion. (Code:
046, Center of upper line) Possible cause and standard value in norma state Cause Lowering of engine oil 1 pressure (When system is normal) Defective engine oil 2 pressure switch (Internal short circuit) s l Short circuit with chassis ground in wiring harness 3 (Contact with ground circuit) 4 Defective monitor panel Standard value in normal state/Remarks on troubleshooting Lowering of engine oil pressure (When system is normal) Check the engine oil pressure. If it is low, repair the troubled parts. Defective engine oil pressure switch (Internal short circuit) aPrepare with starting switch OFF, then hold starting switch OFF and start engine and carry out troubleshooting.
E02 Engine Resistance Between terminal and chassis ground When stopped Min. 1 Mz When operated Max. 1 z Short circuit with chassis ground in wiring harness (Contact with ground circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Between P02 (female) (7) – E02 wiring harness R and chassis ground esistance Max. 1 z Defective monitor panel aPrepare with starting switch OFF, then hold starting switch ON and start engine and carry out troubleshooting. P02 Engine Voltage Between (7) and chassis ground When stopped 20 – 30 V When operated Max. 1 V