TROUBLESHOOTING E-16 E-16 Engine coolant thermometer is abnormal Circuit diagram related to engine coolant temperature sensor 20-430 PC130-7 (1) Trouble (1) While engine coolant temperature is rising normally, thermometer does not rise from white range (C). (2) While engine coolant temperature is stabilized normally, thermometer rises to red range (H). Related informatio • The input state (ON/OFF) from the engine coolant temperature sensor can be checked with the moni- n toring function. (Code:
041, by 10 mV) Possible cau and standard value in norm state Cause Defective engine coolant temperature sensor 1 (Internal disconnection or short circuit) Disconnection in wiring harness 2 (Disconnection in wiring harness or defective contact in connector) ses Short circuit with chassis al ground in wiring harness 3 (Contact with ground circuit) Short circuit with power 4 source in wiring harness (Contact with 24-V circuit) 5 Defective monitor panel Standard value in normal state/Remarks on troubleshooting efective engine coolant mperature sensor nternal disconnection or hort circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch.
E05 (male) Engine coolant temperature Resistance Between (1) and (2) 10 – 100 °C 3.5 k – 90 kz Between (2) and chassis ground Min. 1 Mz isconnection in wiring arness Disconnection in wiring arness or defective ontact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Wiring harness between P02 (female) (1) and E05 (female) (2) Resistan ce Max. 1 z Wiring harness between P02 (female) (13) and E05 (female) (1) Resistan ce Max. 1 z hort circuit with chassis round in wiring harness Contact with ground ircuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch.
Between P02 (female) (1) – E05 (female) (2) wiring harness and chassis ground Resistan ce Min. 1 Mz hort circuit with power ource in wiring harness Contact with 24-V circuit) aPrepare with starting switch OFF, then turn starting switch ON and car- ry out troubleshooting. Between P02 (female) (1) – E05 (female) (2) wiring harness and chassis ground Voltage Max. 1 V efective monitor panel aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. P02 Engine coolant temperature Resistance Between (1) and (13) 10 – 100 °C 3.5 k – 90 kz Between (1) and chassis ground Min. 1 Mz