Komatsu — TROUBLESHOOTING

TROUBLESHOOTING H-19, H-20 H-19 Machine is not steered well or steering power is low H-20 Travel speed does not change PC130-7 20-519 (1) Trouble • Machine is not steered well or steering power is low. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of travel PPC valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting.

Travel lever PPC valve output pressure Neutral position 0 MPa {0 kg/cm2} FORWARD or REVERSE position 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of travel junc- tion valve The travel junction valve of the control valve may have a malfunction. Check it directly. 3 Malfunction of travel control valve (spool) The spool of the travel control valve may have a malfunction. Check it directly. 4 Malfunction of travel control valve (pressure compensa- tion valve) The pressure compensation valve of the travel control valve may have a malfunction. Check it directly. 5 Malfunction of travel control valve (suction valve) The suction valve of the travel control valve may have a malfunction.

Check it directly. 6 Malfunction of travel motor (safety-suction valve) The safety-suction valve of the travel motor may have a malfunction. Check it directly. Trouble • Travel speed does not change. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of travel speed shifting solenoid valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting.

Travel speed switch Travel lever Solenoid valve output pressure Lo position Neutral position 0 MPa {0 kg/cm2} Hi position FORWARD or REVERSE position 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of travel motor (speed shifting section) The speed shifting section of the travel motor may have a malfunction. Check it directly.