Komatsu — TROUBLESHOOTING

TROUBLESHOOTING S-7 S-7 Exhaust smoke is black (Incomplete combustion) General causes why exhaust smoke is black PC130-7 20-615 (1) nsufficient intake of air mproper condition of fuel injection Excessive injection of fuel Causes dezieS ,regrahcobrut ecnerefretni deggolC ria renaelc tnemele Worn piston ring, cylinder Clogged injection nozzle, defective spray reporpmI noitcejni gnimit Defective injection pump (excessive injection) Improper valve clearance Crushed, clogged muffler Leakage of air between turbocharger and head Defective contact of valve and valve seat Defective injection pump (rack, plunger seized) Questions Check items Confirm recent repair history Degree of use of machine Operated for long period Color of exhaust gas Suddenly became black Gradually became black Blue under light load Engine oil must be added more frequently Power was lost Suddenly Gradually Non-specified fuel is being used Noise of interference is heard from around turbocharger Dust indicator lamp is red Blow-by gas is excessive Engine pickup is poor and combustion is irregular When exhaust manifold is touched immediately after starting engine, temperature of some cylinders is low Timing lock on fuel injection pump does not match Seal on injection pump has come off Clanging sound is heard from around cylinder head Exhaust noise is abnormal Muffler is crushed Leakage of air between turbocharger and head, loose clamp When turbocharger is rotated by hand, it is found to be heavy When air cleaner element is inspected directly, it is found to be clogged When compression pressure is measured, it is found to be low Speed does not change when operation of certain cylinders Troubleshooting is stopped When check is made using delivery method, injection timing is found to be incorrect Injection pump test shows that injection amount is incorrect When valve clearance is checked directly it is found to be outside standard value When muffler is removed, exhaust color returns to normal When control rack is pushed, it is found to be heavy, or does not return When air cleaner element is inspected directly, it is found to be clogged When compression pressure is measured, it is found to be low Speed does not change when operation of certain cylinders is stopped When check is made using delivery method, injection timing is found to be incorrect Injection pump test shows that injection amount is incorrect When valve clearance is checked directly it is found to be outside standard value When muffler is removed, exhaust color returns to normal When control rack is pushed, it is found to be heavy, or does not return Remedy Replace Clean Replace Replace Adjust Adjust Adjust Replace Correct Replace Replace