Komatsu — 20-201--.pdf

TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL a User codes and remedies shown to operator 20-150 PC130-7 (1) User code Error mode Remedy (shown to operator) Caution buzzer E02 Error in pump control system If the emergency pump drive switch is set in the upper posi- tion, the machine can operate normally. Have the machine inspected immediately, however. q E03 Error in swing brake system Set the swing holding brake release switch in the upper posi- tion to release the brake. Apply the swing brake manually with the swing lock switch, if necessary. The brake may not be released, depending on the cause of the failure. In any case, have the machine inspected immediately.

q E05 Error in governor system Have the machine inspected immediately. q