TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL Monitoring codes table PC130-7 20-157 (1) Code Monitoring item Unit Remarks 001 Monitor panel model code Numeral 002 Governor and pump controller model code (Pump side) Numeral 003 Governor and pump controller model code (Engine throttle side) Numeral 008 Connecting condition of network Numeral 010 Engine speed 10rpm 011 Pump discharge pressure kg/cm2 012 Pump discharge pressure kg/cm2 013 PC-EPC solenoid output current 10mA 015 LS-EPC solenoid output current 10mA 016 2nd throttle speed 10rpm 018 (Unused) — 019 (Unused) — 020 Input condition of switch 1 a Swing oil pressure switch (ON) (6bit) b Travel oil pressure switch (ON) (6bit) c Boom LOWER oil pressure switch (ON) (6bit) d Boom RAISE oil pressure switch (ON) (6bit) e Arm IN oil pressure switch (ON) (6bit) f Arm OUT oil pressure switch (ON) (6bit) 021 Input condition of switch 2 a Bucket CURL oil pressure switch (ON) (6bit) b Bucket DUMP oil pressure switch (ON) (6bit) c (Unused) (6bit) d Service oil pressure switch (ON) (6bit) e (Unused) (6bit) f (Unused) (6bit) 022 Input condition of switch 3 a (Unused) (6bit) b (Unused) (6bit) c One-touch power maximizing switch (ON) (6bit) d Swing holding brake release switch (RELEASE) (6bit) e Swing lock switch (LOCK) (6bit) f (Unused) (6bit) 023 Drive condition of sole- noid valve a (Unused) (6bit) b (Unused) (6bit) c Swing holding brake solenoid (ON) (6bit) d (Unused) (6bit) e 2nd relief solenoid (ON) (6bit) f Travel speed shifting solenoid (ON) (6bit)