2. Work equipment, switch, and travel speed Hydraulic oil temperature: 45 55 °C *1: Until cylinder cushion starts working 1. Engine 20-170 PC130-7 (1) Inspector Date of inspection User's name Service meter Serial No. Model Judgment Good/Bad Good/Bad Good/Bad Measured value Standard value Service limit value 2,250 – 2,450 0.25 {2.5} 1,050 – 1,150 0.15 {1.5} 2,080 – 2,280 0.98 {100} 1,300 – 1,500 Standard value for new machine 2,250 – 2,450 0.34–0.54{3.5–5.5} 1,050 – 1,150 Min. 0.18{Min. 1.8} 2,080 – 2,280 Max. 0.49{Max.
50} 1,300 – 1,500 Unit rpm MPa{kg/cm2} rpm MPa{kg/cm2} rpm kPa{mmH O} 2 rpm Measured item Engine speed Engine oil pressure Engine speed Engine oil pressure Engine speed Blow-by pressure Engine speed Condition Operation of work equipment All levers in neutral All levers in neutral All levers in neutral All levers in neutral Arm DUMP relief Arm DUMP relief All levers in neutral One-touch power max. switch OFF OFF OFF OFF ON ON OFF Auto decelerator OFF OFF OFF OFF OFF OFF ON Working mode A A A A A A A Fuel control dial Full (MAX) Full (MAX) Low (MIN) Low (MIN) Full (MAX) Full (MAX) Full (MAX) No. 1 2 3 4 5 6 7 Judgmen Measured value Standard value Service limit value Max. 4.3 Max. 3.7 Max.
4.4 Max. 4.6 Max. 5.4 Max. 3.7 22.8 – 34.4 22.8 – 34.4 36.9 – 55.3 36.9 – 55.3 20.1 – 26.1 20.1 – 26.1 Standard value for new machine 3.3 – 4.1 2.8 – 3.4 2.8 – 3.6 3.0 – 3.8 3.7 – 5.1 2.6 – 3.2 23.8 – 33.4 23.8 – 33.4 36.9 – 55.3 36.9 – 55.3 19.7 – 24.1 19.7 – 24.1 Unit sec Measured item Boom RAISE (*1) Arm OUT (*1) Arm IN (*1) Arm IN (*1) Arm IN (*1) Bucket CURL Right Left Right Left Right Left Swing (5 turns) Lo Hi Travel (5 turns) Condition Position of work equipment Max. reach, no load Boom top on level, no load Boom top on level, no load Boom top on level, no load Boom top on level, no load Arm top and boom foot on level, no load Max.
reach Push up track shoe 1 side by 1 Working mode A A A E L A A A Fuel control dial Full (MAX) Full (MAX) Full (MAX) Full (MAX) Full (MAX) Full (MAX) Full (MAX) Full (MAX) No. 1 2 3 4 5 6 7 8