. OPERATION OPERATION STARTING ENGINE WARNING the engine again. (1) when the cooling water F). The pre-heating time in cold areas changes according to the water temperature when starting the engine. 2. When pre-heating pilot lamp (2) goes out, release the accelerator pedal, then turn the key in starting switch (1) to the START position. The engine will then start. 3 - 49 S tart the engine only after sitting down i n the o perator' s seat. D o not attempt to star t the engine by short-circuiting the engine starting c C ircuit. Such an act m heck that there are ay cause a serious bodily no persons or obstacles in injury the su or fire.
rrounding area, t hen sound the horn and start the engin e. cause explosions. N ever use starting ai d fluids as they may cause explosions. E xhaust gas is toxic. When starting the engine in confined spaces, be p articularly careful to ensure good ventilation. NOTICE Do not keep the startin seconds. If the engine will not sta g motor rotating continuously for more than 20 rt, wait for at least 2 minutes before trying to start 1. Turn the key in starting switch Pre-heating will a utomatically start (2) will light up. Automatic pre-he temperature is les s than -5°C (23° o the ON p osition.
re-heating pilot lamp The pre-heating times are as shown b Cooling water temp erature Pre-heating time - 5°C (23°F) 20 sec. -20°C (- 4°F) 40 sec.