Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION switch (1). actuated. Even if the accelerator pedal is Cooling water temperature Turbo protect time above 10 ° C (50 ° F) 0 sec 0 ° C to 10 ° C (32 ° F to 50 ° F) 0 to 6 sec -10 ° C to 10 ° C (14 ° F to 32 ° F) 6 to 12 sec -30 ° C to -20 ° C (-22 ° F to -4 ° F) 16 to 20 sec -20 ° C to -10 ° C (-4 ° F to 14 ° F) 12 to 16 sec below -30 ° C (-22 ° F ) 20 sec If the accelerator pedal is kept depressed, the engine speed will suddenly rise after the turbo protect time. To prevent this, release the accelerator pedal. The turbocharger rotates at extremely high speed.

Immediately after the engine is started, the pressure of the lubricating oil has not risen sufficiently, so if the engine speed is suddenly raised, it may lead to damage or seizure of the turbocharger bearing. The turbo protect function acts to prevent this problem. It uses electronic control to prevent the engine speed from rising above a certain speed for the first few seconds after the engine started. To improve the ease of starting in cold weather, the low idling speed becomes slightly higher for the time given below and the engine sound is different. In addition, it functions to make the acceleration gradual during this time.

Cooling water temperature Injection characteristics change time 20 ° C to 0 ° C (68 ° F to 32 ° F) 0 to 6 sec above 20 ° C (68 ° F) 0 sec 0 ° C to -20 ° C (32 ° F to -4 ° F) 6 to 12 sec -20 ° C to -30 ° C (-4 ° F to -22 ° F) 12 to 15 sec 3 - 50 3. Afte eleas The key wi ll automaticall y return to the O N position 4. Immediate ly after starting the engin e, run i t at idling. D o no t depress the accelerator pe dal or o perate the work equipment during this time. Guideline f or idlin g time Cold te mperature: 15 seconds o r more When fi rst starting engine a fter changi ng engine oi l and replacing engine oi l filter:

2 0 seconds REMARK Immediatel y after t he engine is turbo protect function is a ctuated. depressed, the engine speed w ill n ot rise a bove 1,000 rpm. pedal is