. OPERATION OPERATION 3 - 70 PRECAUTIONS WHEN DRIVING MA When th e machine travels at high s peed for a long distance, the tire s become extremely hot. This causes early wear of the tir es and should be avoided as much as possible. If the machine must be driven for a long distance, tak e the following precautions. Follow the regulations related to this machine, and drive carefully. Befor e driving the machine, carr y out the checks before startin The m ost suitable tire pressure, travel speed, or tire type differ according to the conditio n of Conta ct your Komatsu distributo r or tire dealer for information.
The f ollowing is a guide to suita ble tire pressures and speeds when traveling on a paved surface with standard tires. Tire p Front tire: 0.34 MPa (3.5 kg/cm2 Rear tire: 0.34 MPa (3.5 kg/cm2, d: 19 km/h (11.8 MPH) Spee Chec k the tire pressure before s After t raveling for one hour, stop the machine for 30 minutes and check the tires a nd all pa rts fo r an y abnormality. Chec k the oil level and coolant l When stopping the machine in e xtremely cold areas, do as follows. To pr event the radiator water tem perature from rising suddenly, do not suddenly sto p the engine.
Gradually cool the ra diator water down before s Alway s travel with the bucket e Never put "calcium chloride" or "dry ballast" in the tires when tr aveling travel surface.