. OPERATION TRANSPORTATION work equipment control levers securely. 3 - 82 UNLOADING 1. Load and unload on firm level groun d only. M aintain a safe distance from the edge o 2. Apply the brakes on the trailer secure ly and ins ert block s under the tires to ensur e that the trailer do es not mo Then fix the ramp s in line with the ce nters of t he trailer and the machine. Be sure that the two sides are at the same he Make the angle o f the ramps a maximum of 1 Set the distance tires. If the ramp sags 3. Remove the chai ns and wire ropes f astening the machine. 4. Start the engine. Warm the engine 5. Set the safety lo ck lever to the FRE E position 6.
Determine the di rection of the ramp s, then dr slowly down the ramps to unload th e machin METHOD OF SECURING MACHI Load the machine on to a trailer as follow 1. Lower the work e quipment slowly. 2. Apply the safety 3. Turn the parking brake switch to the ON position to apply the ON posi tion to a pply the parking brake. 4. Turn the starting switch to the OFF p osition to stop the engine, and pull out the s tarting switch key.