. OPERATION TROUBLESHOOTING METHOD OF RELEASING PARKING BRAKE WARNING will not run for some reason, use the following method to release the parking brake and tow the 2. Turn the emergency parking brake switch to the "CANCEL" position. When doing this, check that the parking brake caution lamp REMARK 3 - 94 Please a sk your Komatsu distributo r to release the parking brake. Stop th e machine on a flat surface wh en releasing the parking brake, and check that the surroundi ngs are safe.
In emergencies or whe n the parking brake must be r eleased on a hill, block the tire s carefully before releasing t When t he parking brake is released, n o braking force can be applied, so check carefully that the s ituation is safe when m oving the ma If the en machine. METHOD OF RELEASING BRAKE BY USING EMERGENCY PARKING BRAKE CANCEL SW If t he pre ssure in the brake accumu lator is high, do as follows. . Turn out.
When the switch is s et to the CANCEL position, t he buzzer will sound continu Norm ally, keep this switch at the If the brake accumulator press ure is low, the parking brake warni ng lamp may not go out an d the alarm buzzer may make a cont inuous high-pitched sound If this happens, release the brak OF R ELEASING MECHANICAL