. MAINTENANCE SERVICE PROCEDURE REPLACING INNER ELEMENT 4 - 20 1. First r emove the outer element, a nd then remove t he inner element. 2. Cove r the air connector side (outl et side) with a clean cloth or tape. 3. Clean the inside of the air cl eaner body, t hen remove the cover installed in Step 2 4. Instal l a new inner element t o the NOTICE The inner e lement mus t not be used again e ven afte r cleaning . When replacing the outer element, replace the inner element at the sam e time. 5. Instal l the outer elemen t an d the c over 6. After replacing t he element, return the red display of t he dust indicator to its original position.