. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE Method of checking level at idling 1)Run at idling for at least 15 minutes, then leave 2)Check when torque converter oil temperature gauge is at 2nd segment from the left 1)At point when stall tempera- ture rises and torque oil tem- perature gauge is at 3rd seg- ment from left 2)Run at idling then check ap- prox. 5 minutes 4 - 25 (1)When check- ing after leav- ing at idling (when heat is balanced in whole trans- mission as after actual work) User operating continuous ly (check during lunch time or check during change of shift) (2)When check- ing after raising tem- perature with stall When shipped from factory, etc.