. MAINTENANCE SERVICE PROCEDURE CHECK TRANSMISSION OIL LEVEL, ADD OIL WARNING (G). 4 - 24 The parts and oil are at high t emperatu re immedia tely after the engine is stopped, and may cause burns. t o go down b efore starting th Carry out th is procedure if there is any sign of oil on th e transmission case, or if there is oil water. 1. Stop the engine and r emove t he cap fro m oil filler ( 2. Take ou t the dipstick ( G) and wipe off th e oil with c 3. Fully ins ert dipstick (G ) into fill er pipe (F ), then rem ove it. 4. The oil l evel should be betwee n the H an d L marks on dipstick level is below the L m ark, add o il through oil filler (F). 5.
If the oil is above the H mark, drain the e xcess eng ine oil f rom drain pl ug (P), and ch eck the oil level ag ain. 6. If the oil level is correct , insert d ipstick (G ) in the dip stick guide, then tig The dip measuri measuri hten the cap. el marks on one side: ENG STOP (for engine is stopped) and ENG IDLE (for ngine is idling). stick has 2 lev ng when the engine i ng when the e ngine is idling). Check the o il level at leas t 8 hours after the engine ha s stopped, and use the ENGINE STO It is also po ssible to check when t he engine is running at low idling, but in that case, do as f