. MAINTENANCE SERVICE PROCEDURE REPLACE BUCKET TEETH WARNING and gloves. 4 - 29 CHECK ELECTRICAL INTAKE AIR HEATER Before the start of the cold season (once a year), contact your Ko matsu di stributor to have the electrical inta ke air heater repaired or checked for dirt or disconnectio It is dangerous if the work equipmen t moves by mist ake whe n the toot h is being et the work equi pment in a stable position , stop th e engine , then se t the safe ty lock for t he work eq uipment contro l lever ecurely to the L If the pin is hit out with strong force, t here is d anger th at the pi n may fly out. Chec k that t here i s no one in the surroundin g area.
T here is danger o f pieces flying duri ng the re placeme nt operation, so a lways we ar protectiv e clothing s uch as safety g lasses BUCKET WITH TIP Replace the teeth before they wear down as far a s the a 1. Raise the buck et to a suitable h eight, th en put b locks u nder the bucket to keep the bottom of th e buck et horizontal. . r of a diameter slightly 2. Remove pin (2 ), then remove t ooth (1) When knockin g out the pin, us e a ba iamete smaller than th e pin, and knock out fro m the o pposite side. REMARK I f it cannot be rem oved by this method, for safety r easons , always contact your Kom have t he replacemen t carried out 3.
Fit new tooth ( 1) in adapter (3), push in pin (2) p artially by hand then knock it i n with a hammer. 4. After operatin come out.