. MAINTENANCE SERVICE PROCEDURE REPLACE ADDITIONAL FUEL FILTER CARTRIDGE WARNING Prepare a filter wrench of the new additional fuel filter Cap (A) acts to prevent the entry of dirt or dust into the filter cartridge. 4 - 48 EVERY 500 HOURS SERV Maintenance for every 50, 100 a nd 250 hours service should be carried out I mmediately after the engine is st opped, all parts are at high temperature, so do n ot replace the filter imme Wait for the engine to cool down T he inside of fuel piping system of the engine is under high-pressure when the e ngine is running.
When replacing the filter, wait for at least 30 seconds after the engine stops to let the internal pressure go d own before replacing th D o not bring any fire or spark clo B e careful when opening the air bleed plug at the fuel filter head and the air bleed er of the supply pump. The system is still u nder pressure and fuel may spu rt out. NOTICE Genuine Komatsu fuel filter cartr idges use a special filter that has highly efficien t filtering ability. When replacing the filter c artridge, always use a genuine Komatsu part. T he common rail fuel injection s ystem used on this machine consists of more pr ecise parts than the con ventional injection p I s ump and nozzle.
f any part other than a genuine K omatsu filter cartridge is used, dust or dirt may g et in and cause problem s with the injection ystem. Always avoid using sub stitute parts. When carrying out inspection or maintenance of the fuel system, pay more attenti on than normal to the en try of dirt. If dirt is s tuck to any part, use fuel to was h it off completely. 1. Set the container to catch the cartridge. 2. Using a filter wrench, turn fil to remove it. 3. After removing the cartridge, installed to the bottom of the cup is used again.) Install cup (2) to the botto 4. cartridge. (When doing this new part.) Cup tightening torque: 10 5. Clean the filter holder.
NOTICE When filling the filter cartridge with f cap Cap (A) fitted. (A) acts to prevent the entry of 6. Fill the filter cartridge with cl 7. (B) in the new filter cartridge Coat the packing surface of