. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING engine is stopped, and may cause burns. Wait for the 4 - 50 temperature to g o down before starti ng the work. When removing t he oil filler cap, turn it slowly to rel ease the i nternal Refill capacity: 37 liters (9.8 US g Prepare a filter 1. Open the eng ine side cover on the right side of the chassis. 2. 3. Open oil filler Place a conta 4. 5. Loosen drain Check the d particles or f distributor. 6. Install drain p 7.
Using the counterclockw In particular, i f this operation is mmediately fter stopping the e ngine, a large amo unt of oil will come out , so wait for 10 minute s before starting th e operation. 8. Clean the filte r holder, fill the new filter cartridg e with engine oil, then coat the seal and thread of the filter cart ridge with engine oil (or coat thi nly with grease) a nd install. contact with the ns. 9. When installi ng, bring the seal surface into filter holder, th en tighten a furth er 3/4 to 1 tur When using a filter wrench to tig hten, be parti cularly careful not to scratch or deform the filter. with the