Komatsu — REPLACE TRANSMISSION OIL FILTER ELEMENT

. MAINTENANCE SERVICE PROCEDURE REPLACE TRANSMISSION OIL FILTER ELEMENT WARNING oil, then tighten the plug again. (6 to 8 kgm, 43.4 to 57.9 lbft) 4 - 52 The p arts a nd oil are at high temperature af ter the engine is stopped, and may caus e serious burns. Wait for the temperature to go down before c leaning the engine bre When using compressed air, there is a haz ard that dirt may be bl own up and cause Always use safety gl asses, dust mask, or o ther protective equipment 1. Remove cover (1 ) and set the contai ner to catch the oil under the filter case. 2. Remove drain pl ug (2) at the bottom o f the filter case, dra in the 3. Loosen hexagonal portion (4) of case (3), then remove case (3).

Remove the element and clean the inside of the case. case (3). 4. Remove the element and clean the i 5. Replace the filter gasket and O-ring with new parts. Co at the gasket a nd O-rin g thinly with clean en gine oil before installing. 6. Assembl e the ne n and install it. Drain mount tightening torque: 49 to kgm, 36.2 to 43.4 lbft) Case tightening torque: 58.8 to 78.5