. MAINTENANCE SERVICE PROCEDURE CLEAN FUEL STRAINER plug (1), then remove the strainer the dirt stuck to the strainer and strainer case, then clean diesel oil or flushing oil. If the strainer is damaged, replace it with a new part. 3. Insert the strainer, then install plug (1). If the plug O-ring is damaged or deteriorated, replace it with a Tightening torque for plug: 78.4 Nm (8 kgm , 57.9 lbft) then remove Be careful not to let dirt enter through the mount while the breather is removed. mounting bolts (1) on the ROPS ± 10.5 kgm , 684 ± 76 lbft) 4 - 60 1. Remov plug.
Remov wash w damag Insert th If the pl new pa gether with the WASH FUEL TANK BREATHER Remove all mud and di the breathe r, immerse it in cleaning fluid and clea TIGHTEN ROPS CAN Check that canopy. Ti there are n ghten any lo Tightening t orque: 927 ± 103 Nm