. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4-26)". REMARK REPLACE ELEMENT IN AIR CONDITIONER RECIRCULATION AIR FILTER, FRESH AIR FILTER CLEAN PPC CIRCUIT STRAINER diesel oil. 3. Assemble the strainer to strainer case (2), then install with flange (1). 4 - 65 3. Stop the m achine so that d rain plug ( 4) of the fina l drive i s at the bottom. R emove oil filler p lug (5) an d drain plug (4), an d drain the oil. 4. After drain install them 5. Add oil to t he specified lev el throug h the oil fille r ports ( 1) and (5) of the a xle housing an d left and right fin al drives. 6. After addin g oil, check tha t the oil is at the s pecified lev el.
For AD (PAGE lugs (2) For operations where the brak e is used frequently, change the axle oil at s Remove both t he recirculation air filter a nd fresh air filter in the same way a s when cleaning, and replace them with new For details of c leaning the recir culation a ir filter, s ee " CLEAN ELEMENT IN AIR CONDITION ER RECIRCULATION FILTER (PAG E 4-45)". cleaning the fresh air filter, see "CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER For details of (PAGE 4-40)". 1. Remove fl 2. Remove st rainer case (2), take out th e strainer, w ash it i n clean