. MAINTENANCE SERVICE PROCEDURE CLEAN ENGINE BREATHER ELEMENT WARNING Komatsu distributor for inspection or 4 - 66 The parts and oil are at hig h temperature after th e engine is stopped, a nd may cau se serious burns. Wait for the temperature o down before cleanin g the engine breather Wh en using compressed a ir, there is a hazard t hat dirt may be blown u p and caus e serious i njury. ays use safety glasses, dust mask, or other protective e quipment. ipe away dust aroun d the breather. emove breather (1). ean the breather bod y with light oil or cl eaning oil , and dry it th compressed air. eplace O-ring with ne w one. Coat a ne w O-ring w ith engine l, set it, then install b reather (1).
CHECK ALTERNATOR, STARTING MOTOR The brush may be worn or have no grease on the bearing, so contact you repair. If the engine is started frequently, carry out inspection every 1000 hours. The b repair If the engine is started freq uently, carry out in spection e very 1000 hours CHECK ENGINE VALVE CLEARANCE, ADJUST As sp ecial tool is required for removing and a djusting th e parts, r equest yo ur Komats u distributor fo r service.
CHECK BRAKE DISC W As sp ecial tool is required for checking and a djusting th e parts, re quest Komatsu dist ributor for serv CLEAN AND CHECK TURBOCHARGER If ther e is carbon or oil slud ge stuck to the blo wer impelle r, it will lo wer the performance of the turboch arger or c ause it to b reak, so ask your Ko matsu distributor to carry out the cleani CHECK PLAY OF TURBOCHARGER ROTOR Conta ct your Komatsu dist ributor to have the rotor play checked.