. MAINTENANCE SERVICE PROCEDURE CHECKING 4 - 67 CHECK ACCUMULATOR FUNC Check the gas p ressure of the accu mulator as fol 1. Stop the ma chine on level groun d and apply t 2. Raise the w ork equipment to the maximum h eight, then place the lift arm control lever at 3. Leave the w ork equipment in thi s position, an 4.
Confirm that it is safe around the machine, the at FLOAT an d lower the work equ ipment to a p ft) from the g When the wo the ground, lower the wo If the work e gas pressur kg/cm2, 99.4 quipment stops mov e may be below th PSI), so contact you ing during th e service lim r Komatsu di the gas pres sure measured or g Carry out the ch ecks within five minu tes of stoppi ng the engine.
If the ma chine is left with the engine s toppe d, the accumulator pre ssure will drop and i t will be impossible to carry out the c CHECK ACCUMULATOR GAS PRESSURE Please contact y our Komatsu distrib utor to have t he gas pressure checke d when making perio dically r eplacement of safety parts o r carrying out the leg ally required 2000 hour or every yea r service. CHECK INJEC TOR ust gas color visually. If there is any abnormality in the exhaust gas color, please contact your Check the exha ontact Komatsu distrib utor for inspection or replacemen t. For details of the acti ly turns black". on to take if there is an abnormality , see ENGINE (PAGE 3-102) "Exhaust ga s occasional