. ATTACHMENTS, OPTIONS HANDLING BRAKE COOLING SYSTEM entering the mount. CLEAN BRAKE COOLING OIL COOLER FINS WARNING Use compressed air to blow off any mud, dirt, or the oil cooler fins. NOTICE 6 - 49 CLEAN AXLE CASE B Remove all mud and dirt from around the breather with a brus After removing the mud or dirt from around the breather the breather, immerse it in cleaning fluid and clean When cleaning the brea (front and rear). After removing the breat her, take steps to prevent d irt or d ust fr om If compressed air, high-pres sure water, or steam hits your body d irectl y or dirt is sent flying by the compressed air, high-pressure water, or steam, there is da nger of personal injury.
Alway s wear protective glasses, dust mask, an d other protective equipment. Clean the fins if any mud or dirt is stuck to the brak e cooling o il cooler. aves clogging It is also possible to use s team or water in place of co mpressed air. Ifthe steam jet nozzle is bro ught to close to the fins, it may damag e the f ins, so keep the nozzle a suitabl e distance away from the fins when