Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WALK-AROUND CHECK WARNING around check the condition of the work equipment and the hydraulic system. or wear to the wheels (side rim, rim base, lock ring). 3 - 35 Always attach the warning tag to work equipment control lever (1 Leakage of oil or fuel, or accumulation of flammable material a hig h temperature parts, such as the engine muffler or turboch ma y cause fire. Check carefully, and if any abnormality is found, it o r contact your Komatsu distributor.

Befo re starting the engine, walk around the machine and loo loose Also check for loose wiring, play, and collection of dust at pl Alwa ys carry out the items in this section before starting the 1. C heck for damage, wear, play in work equipment, cylind C a heck that there are no cracks, excessive wear, or play ny abnormality is found, repair it. 2. R emove dirt and dust from around engine, battery and r C m t heck if there is any dirt or dust accumulated around the e aterial (dead leaves, twigs, etc.) accumulated around t he engine muffler or turbocharger. Remove all such dir 3. C heck for coolant or oil leakage around the engine.

C is heck that there is no oil leakage from the engine or co found, repair it. 4. C heck for leakage of oil from transmission case, axle, hy heck that there is no oil leakage. If any abnormality is 5. C heck for oil leakage from the brake line. C heck that there is no oil leakage. If any abnormality is 6. C heck for damage or wear to tires and loose mounting b C T If heck for cracks or peeling of the tires and for cracks ighten any loose wheel nuts. If any abnormality is foun any valve caps are missing, install new caps. 7. C heck for damage and loose bolts on the handrail and s R epair any damage and tighten any loose bolts.