. OPERATION OPERATION WARNING REMARK ± 3.6 lbft) or if there is any seat 75.9 lbft). 3 - 36 8. Check for damage to gauges, lamps on the instrument panel and l oose Check for damage to the panel, gauges and lamps. If any problem i s found, r eplace the parts. Clean off an y dir n the surface. Tig 9. Check for loose air Check for the loose bolts. If loose, tighten th 10. Check for loose ba ighte n any loose t 11.
Check for damage to the seat belt and mou Even if ther e appears to b e no abnormality with the se at belt, replace it onc e every t hree y The date o f manufactur e of the seat belt is marke plac e indicated by the arrow in the diagram on t Che ck that there are no loose bolts on the equipm seat belt to the machin e, and tighten if necessar Tightening torque: 24.5 ± 4.9 Nm (2.5 ± 0.5 kgm If the belt i s damaged or fluff is starting to form, damage or deformation of the seat belt holders belt. belt. 12. Check for loose RO PS mounting bolts. e or damaged bolts. 927 ± 103 Nm (94.5 ± 10.5 kgm , 683.5 ± genuine Komatsu bolts.
I I Check for any loos f any l oose bolts a re found tighten them to 927 ± 103 Nm (94.5 ± 10.5 kgm f any bolts are dam aged, replace them with genuine Komatsu bolt 13. Clean cab window. Clean the cab wind ow to ensure good visibil ity when operating the machine