Komatsu — EXTERNAL POWER SOURCE TYPE ENGINE PREHEATING HEATER

. OPERATION EXPLANATION OF COMPONENTS EXTERNAL POWER SOURCE TYPE ENGINE PREHEATING HEATER For cold weather (ambient temperature -30 ° C (-22 ° F)) For details, see Step 3. 2. It is necessary to make locally the cable used to bring the electricity above to the input socket (receptacle) installed to the machine from the external power source. For details of the manufacturing procedure, see Section 4. REMARK The electric leakage breaker is installed to prevent danger of electrocution if the electrical supply leaks to the machine. The ground cable is connected to the ground for the same reason. This is to prevent any drop in voltage.

3 - 66 This preheater is used as a starting aid when it is difficult to start the engine because of the cold temperature . It is used even when the ambient temperature is above -20°C (- 4°F) in seasons where the temperature goes do wn to -20°C (-4°F). Using an external power source (single phase, AC200 - 240V ) to heat up the engine coolant and the oil in the e ngine oil pan and power train oil pan will make it easier to start th e engine. PROCEDURE FOR SETTING UP EXTERNAL POWER 1. When using this engine preheating heater, it is necessa ry to provide the following external power source 3.

The external power source input cable is the electric cab le to bring the electricity from the local AC power s upply n in the diagram below to operate the electric he ater.