. OPERATION OPERATION Above +10 ° C (50 ° F) 0 Varies within a range of 0 to 20 seconds Below -10 ° C (14 ° F) 20 +10 ° C to -10 ° C (50 ° F to 14 ° F) 3 - 96 7. Wh en the eng ine rotation s tabilizes, return to the low i dle (MIN) position of fuel control dial (1) an d then c arry out warming- up operation. REMARK rom OFF left, preheating pilo t lamp (3) wi ll light up and preheating w ill start. (Preheating continues w hile the s tarting s witch is held at the left .) of the preheating time, see the table in Step 5.
ing is being carried out, the preheating pilot lamp (3) lights up to show that preheating is being oes not start with the above operation, wait for about 2 minutes, and repeat steps 3. And 4. For t he details of the prehe ating time, see the table in Whil e preheat carri ed out. If the engine d oes not start with the above operation, wait for about 2 minutes, and re pea t step s 3. And The relationsh ip between th e actuation time of the tur bo protect function and th e engine c oolan t temperature is as fo llows. l control dial is operated within the time given below, the engine speed will not change.
ion Even if the fue l control dial is operated within the time given below, the engine speed will not c Turbo pr otect funct The tur bo protect function is a function to protect the turb ocharger by keeping the engine speed a t less tha n 1000 rpm im mediately after the engi ne is started. Whe n the turb o protect func tion is actuated, the engin e speed is held at less t han 10 00 r positi on of the fuel control d Whe n the turbo protect funct ion is actuated, the engine speed is held at less than 1000 r pm, even if the fuel control dial i s operate d. Whe n the turbo protect funct ion is canceled, the engine speed is set to the speed for the position o f the fuel control dial.
The relationsh turbo protect fu nction and th e temperature of the engin is as shown in egardles s of the