Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION METHOD OF LIFTING MACHINE WARNING work equipment lock lever to the LOCK position (L) securely. 3 - 134 The person using the crane to carry out lifting operations must be a qualified cran Never carry out lifting operations if a ny person is on the machine be ing lifted.

Always use a wire rope that has amp le strength for the w eight of the machine bein Keep the m achine horizontal when li When carryi ng out lifting operations, set the work equipme nt lock leve r and parking brake lever to the LOCK position to p reven he machin e or work equipment from moving unexpected Never enter the area under or aroun There is da nger of the machine losin Use the pro cedure below to set the machine in the prope r posture a nd use the lifti ng equipment when lifting the machine. NOTICE f lifting applies to the standard specification machine. lifting differs according to the attachments and options installed.

Thi s method o f lifting applies to the sta ndard specification The method of lifting differs according to the attachments a nd options installed. For details of t he procedure for machin es that are not the st andard spe cification, plea se consult yo ur Komatsu distributo For weight, s ee "SPECIFICATION S (PAGE 5-2)" When lifting t he machine, stop it on a level place, the n observe the following procedure. 1. Stop the engine and set the parking brake lever to the LOC position (L) securely. 1. Stop the engine and set the pa 2. Set the