. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL before 4 - 53 1. Open the en gine side cover on the left side of the ch assis 2. Remove dips tick (G) and wipe t he oil off with a cloth. 3. Fully insert d ipstick (G) into filler pipe, then remove it 4. The oil on the oil level gauge (G) should be between th e H mark and L mark. If the oil is be low the L mark, add oil through the dipsti ck guide. 5.
If the oil is a bove the H mark, o pen inspection cover (2) in the center of the bottom face of th e power train case, drain the excess oil fro m drain plug (P) of the engine damper w hich can be seen towa rds the front of the machine from the in spection window, then check the oil level again. REMARK level while the engine is stopped. Check the oil level while the engi ne is stopped. If the machin checking the e is inclined, set it in a level positio oil level.