Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE (including engine by-pass filter cartridge) WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil temperature to go down before performing this operation. 4 - 54 EVERY 500 HOURS SE Maintenance for every 250 ho urs should be performed at t he same time Refill capacity: 38 liters (1 0.04 US gal) nd filter wrench. nt left under the machine and put a eath to catch the drained oil. Prepare a socket wrench a 1. Open cover (1) at the fro nd pu container directly undern eath to catch the drained oil 2.

Loosen drain plug (P) (wi th a slit) slowly to avoid getting oil on yourself, and drain the oil . there is excessive metal particles or your Komatsu distributor. 3. Check the drained oil, if foreign material, contact 4. Install drain plug (P). 5. Open up the engine side cover on the left side of the machine. 6. Remove bottom side cov er (2). 7. Using a filter wrench, tur to remove it. n filter cartridge (3) counterclockwise 8. Clean the filter holder, fill the new filter cartridge with clean oil, coat the thread and pack ing portion of the new filter cartridge with oil (or coat thinly wit h grease), then install. cartridge, bring the packing surface 9.

When installing the filter cartridge, bring the packing into contact with the filter holder, then tighten a furthe r 3/4 t o 1 turn. After replacing the filter c artridge, add oil through oil filler (F) 10. (F) until the oil level is betwe en the H and L marks on the dipstick (G). Run the engine at idle fo r a short time, then stop the engine, 11. and check that the oil leve l is between the H and L marks on the dipstick. For details, see " CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL (PAGE 3 -76)".