Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE maintenance in the "REPLACE FUEL PRE-FILTER CARTRIDGE WARNING to remove it. 4 - 63 REPLACE FUEL MAIN FILTER CARTRIDGE Carry ou t this oper ation afte (PAGE 4-55)" for e very 500 After t he engine h as been ope rated, all parts are at hig h temperature, so do not replace the filter immed iately. Wait for all parts to coo l down befo re starting the operation. ng system when the engine is running. High p ressure is g enerated in side the engine fuel pipi When replacing th e filter, wa it for at least 30 seconds after stopping the engine to let the internal p ressure go down before replac ing the filter . ire or flame close.

pening the air bleed plug in the fuel filter head. It is still under pressure, so fuel may spurt out. Do not bring any f ire or flame Be car eful when o pening the air bleed plug in the fuel filter head. It is still under pressure, so fuel m NOTICE Genui ne Komatsu fuel filter cartridges use a special filter that has highly efficient filtering ability. W hen replacing the filter cartrid ge, always use a genui ne Komatsu part. The co mmon rail f uel injectio n system used on this m achine consists of more precise parts than th e conventional injection pump and nozzle.

If any part other th an a genui ne Komatsu filter cartridg e is used, dust or dirt may get in and cause pro blems with the injection system . Always a void using substitute parts. When carrying out inspection or maintenance of the f uel system, pay more attention than normal to t he entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Prepare a filter wre nch and a container to catch th 1. Clos e valve (1) at the bo 2. Set t 3. Usin he contain g a filter w er to catc rench, tur h the fuel under the filt n filter cartridge (2) co