Komatsu — CAR STEREO, HANDLING

. OPERATION EXPLANATION OF COMPONENTS PRECAUTION WHEN USING WARNING 3 - 71 If a voltage greater than the specif ied voltage is input, it may cause fire, el ectrocution , or othe r failure . Never input any voltage other than the specified voltage. Places inside the radio are under high voltage. Do not remove the cover Do not carry out any modification s. This may cause fire, electrocution, or other fail If t he sound cannot be heard, no Komatsu distributor to make repa sk your Stow the antenna when travel ing in places with low overhead cle arance. possible to hear other machines. To ensure safety during opera tions, keep the volume at a level w here it is possibl e to hear othe r machines.

If water gets inside the speak er case or radio (auto tuning), it ma y cause a serious problem, tak e care not t o let water get in these items. Do not wipe the scales or butt ons with solvent such as benzene or thinner . Wipe with a dry soft cloth. If the dirt cannot be removed easily, so ak the cloth with alcohol. If t he battery is disconnected, such as when it is being replaced, o r when th e batter y isolator switc h on the mining specification machine is turne d OFF, the settings for the preset b uttons sto red in m emory may a ll be deleted , so reset them after reconnecting the battery. NOTICE Handling cassette tape a month with a commercially available head cleaning tape.

Clean the tape head approx. once a month with a commercially available head clea ning tape Do not leave the tape any place w here it is exposed to direct sunlight, an y place tha t is excessively dusty, o r any place w here there is a magnetic field. e tape is thin and it easily gets caught up inside the machine. aught up inside the machine. Use a pencil to wind in the tape to remove any slack. Do not use 120-minute tapes. Th e tape is thin and it easily gets caught up inside th If t he tape is slack, it easily gets c aught up inside the machine. Use a pe ncil to win d in the t ape to remove any slack Do not use any cassette tape if the label has started to come off.

It may ca use defect ive rotation, or i t may be impossible t o get the tape out of the machine.