. OPERATION EXPLANATION OF COMPONENTS and outside air (FRESH) is performed automatically. Display Monitor Monitor (7) displays the status of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. Air Conditioner Switch Switch (8) is used to turn the air conditioner (cooling, dehumidifying, heating) ON or OFF. When the fan is actuated (display (b) is shown) and air conditioner switch (8) is pressed, the air conditioner is switched ON, lamp above the air conditioner switch lights up, and the air conditioner starts.
When switch (8) is pressed again, the air conditioner is switched OFF, lamp above the air conditioner switch goes out, and the air conditioner stops. Air conditioner cannot be operated while the fan is off. 3 - 77 RECIRC/FRESH Selector Switc Switch (6) is u sed to switch the air source between recirculation of the air inside t he cab and intak e of fresh a ir from the outside. When switc h (6) is pressed, the lamp a bove the selector switch lights up to During auto show that air is b matic operation, ein the g blown selectio out n of i RECIRC Outside air is shut off and only air inside the cab is circulated.
Use this setting to perform rapid cooling of the cab or when outside air is dir FRESH Outside air is taten into the cab. Use this setting to take in fresh air when performing demisting.