. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 92 Normally, do n ot open the radiator cap (1). W hen checking the coolant level, check th e reserve tank (2) when the eng Do not remove the cap (1) when the radiator ( 3) coolant is hot. Boiling coolant may s purt out. After the coolant temp erature goes down, turn the cap (1) slo wly to release the pressure, the 1. Open the si de cover on the left side of th e machine, then check that the wa ter level (5) in the reserve t ank (2) is between the FULL and L OW marks. If the water level (5) is low, add coolant as follows. ve tank becomes empty, there is probably water 2. If the reser leakage.
Af ter checking, repair any abno rmality immediately. It no abnorm ality is found, check the lev el of the water in the radiator. If i t is low, add Supercoolant ( the Supercoolant in the nt to the reserve tank. AF-NAC) of the same density as radiator, then add Supercoola 3. In refilling, fi ll with water through cap (1). Check that the coolant level is high er than the strainer (4) botto m as illustrated at right. At the sam e time, fill reserve tank (2) w ith coolant to the full. 4. To refill the radiator, first stop the engine and pour coolant until it reaches t he top of the filler opening.
Then start the engine, after idling f or 5 minutes recheck the coo lant level, add coolant if necessar y. g water, tighten caps (1) and (6) securely. 5. After addin g water, tighten caps (1) and