Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION USING SEAT BELT WARNING the (1) to 3 - 105 Always install a seat belt on machines equipped with R Before fastening the seat belt, inspect the securing b racke ts and b elt for abnormal conditio Replace any worn or dam aged seat belt or the securing br ackets. Even no problem can be seen with the belt, always r eplac e the sea tbelt once every three y ears. The d ate of manufactu re is given on the rear side of Adjust and fasten the sea t belt before operating the machi Always use the seat belt when operating the machin Fit the seat belt across y FASTEN THE BELT AND RE MOVE IT is tight without being too tight.

ess the brake pedal fully, and adjust k is pressed against the backrest. l the right belt, then insert tongue Fasten the belt so that it is tight without being too tight 1. 2. 3. 1. Sit on the seat, depr ess the brake pedal fully , and seat so that your bac k is pressed against the 2. Sit on the seat, pul l the right belt, then in sert securely into buckle (2) until a click is heard. Pull the bel locked. belt, press the red button in buckle (2 ollows your body and is not twisted. Pull check that it is firmly 3. When removing the free the belt. Fit the belt so that it f ollows your body and is not t Check that the bolts of th e clamp securing the be lt to t he chas sis are not loose.

Tigh ten them i f they are l oose Tightening torque: 24.5 ± 4.9 Nm (2.5 ± 0.5 kgm, 18.1 ± 3.6 lb If the seat belt is scratch ed or frayed, if any fittings are broken or deformed from long service, r eplace the seat belt immediately.